Home › Industries › Manufacturing
Manufacturing financing for the months between buying materials and getting paid
A manufacturer pays for steel, resin or fabric, and for the labor to turn it into product, weeks before a customer's net-30 or net-60 terms even begin. Here is that cycle with the federal payment rules and Federal Reserve survey data, a worked order, and the funding built for each part of the gap.
Independent referral service, not a lender or anyone's agent. If you're funded, the funding company may pay us a referral fee, which is part of the price you pay. We never charge you a fee. How we get paid.

- The gapMaterials and payroll paid before the customer's terms start
- Federal customersProper invoices due by the 30th day, with a 15-day goal for small businesses
- Tariffs62% of manufacturers reported tariff-related cost challenges (Fed, 2025 survey)
- SBA 504Machinery with 10 or more years of useful life, loans up to $5.5 million
The manufacturing cash cycle, step by step
A manufacturer's gap has three parts. Materials sit in stock and in production; finished goods ship and wait for the customer's terms; and, working the other way, your own suppliers give you some days before their bills are due.
- Materials and inventory are paid when the supplier's terms run out, often before the product ships.
- Production labor is paid every payroll, whatever stage the order has reached.
- Customer terms of net 30, 60 or 90 days start when you invoice, which is usually at shipment rather than at order.
Government buyers are the customers whose clock is written down. A federal agency must pay a proper invoice by the later of the 30th day after its billing office receives it and the 30th day after it accepts the goods. Where the contract sets no specific date, agencies are told to aim for payment within 15 days for small business contractors.
The manufacturer example in the cash gap calculator uses monthly costs of $200,000, 45 days from spending to invoicing, 60 days for customers to pay and 30 days of supplier credit. That is a 75-day gap and about $493,151 of cash tied up, two and a half months of costs carried before the customer pays.
Sources: FAR 32.904, Determining payment due dates; FAR 32.009-1, Providing accelerated payments to small business contractors.
Tariffs and imported inputs widen the gap
In the Federal Reserve's 2025 Small Business Credit Survey, 62% of manufacturers said higher costs tied to tariffs were a financial challenge, second only to retailers at 69%. Rising costs of goods, services or wages were the most common challenge overall, reported by 80% of manufacturers. Across all industries, 48% of firms sourced at least some of their inputs from outside the United States in 2024, and 14% sourced more than half.
Whether you pay a duty at the border or a supplier builds it into the price, it lands in the materials cost you pay before the product sells, which is the part of the cycle that needs financing. An example, not a forecast: if the materials for an order cost $96,000 and a tariff adds 20%, the same order ties up $19,200 more cash for the same number of days, and takes $19,200 out of the margin unless the price moves too.
Sources: Federal Reserve Banks, Small Business Credit Survey: 2026 Report on Employer Firms.
Manufacturing financing: four gaps and what fits each
| The gap | What fits | How it works |
|---|---|---|
| Invoices to business customers on net terms | Invoice factoring | You sell the invoice once the goods ship; the factor advances most of it and collects from your customer. |
| The same production cycle, month after month | Business line of credit, or for an established firm the SBA's Working Capital Pilot | Draw for materials and payroll, repay from collections. |
| A CNC machine, press, oven or packaging line | Equipment financing, or SBA 504 for long-life machinery | The machine secures the debt and the term follows its working life. |
| A plant expansion or a building | SBA 504 or 7(a) | Long terms with fixed or capped rates; weeks to months to close. |
The SBA's programs for manufacturers are worth knowing before you pay for speed:
- 7(a) Working Capital Pilot: monitored lines of credit up to $5 million, aimed at manufacturers, wholesalers and professional services firms with at least a year of operating history that can produce timely financial statements, receivable and payable agings and inventory reports.
- 504 loans: up to $5.5 million over 10, 20 or 25 years, with rates pegged to the 10-year Treasury and fees of about 3% of the debt, which can be financed with the loan. They fund machinery with a "useful remaining life of a minimum of 10 years," including AI-supported manufacturing equipment, but never working capital or inventory.
- Section 179: for tax years beginning in 2026, a business can expense up to $2,560,000 of qualifying equipment, reduced dollar for dollar once purchases pass $4,090,000. Ask a tax adviser how that fits with financing the machine.
An order bigger than your cash is its own problem. Purchase-order financing, where a funder pays your supplier directly against a customer's order, is not one of the funding types this site covers. Before any funding, work the cheaper steps in order: a deposit from the customer, longer terms from the supplier, then factoring the invoice once the goods ship.
Sources: SBA, 7(a) loans and the Working Capital Pilot; SBA, 504 loans; IRS, Rev. Proc. 2025-32, section 3.24 (Section 179 limits for 2026).
Where each type fits in manufacturing
Worked example: a $240,000 order on net-60 terms
These figures are an example, not a quote or an average. A shop takes a $240,000 order. Materials cost $96,000 and are due 30 days after purchase; labor and overhead for the run come to $96,000 over the 45 days it takes to make and ship it. The customer pays 60 days after the invoice, on day 105.
- By day 45 the shop has paid out $192,000 and collected nothing.
- Gross margin on the order: $240,000 − $192,000 = $48,000, or 20%.
- Factoring the invoice at shipment, at an example 85% advance: $204,000 on day 45.
- Fee at an example 2% per 30 days: if the customer pays on day 60 of its terms, two periods, $9,600, and a rebate of $26,400.
- If the customer pays three days late, 63 days after the invoice, a fee charged for each 30 days or part of 30 days becomes three periods, $14,400. Charged by the day, it would be $10,080.
So the funding takes 20% to 30% of this order's margin, depending on one late payment and how the fee is counted. As simple yearly rates, that is about 28.6% on the on-time order and 40.9% on the late one. For a shop that meets a line's requirements, $204,000 drawn for the same 60 days at an example 12% a year would cost about $4,024 in interest.
Price the funding before you quote the job, not after. The invoice factoring cost calculator handles each fee basis, and the funding company may pay us a referral fee if you are funded, a cost that can sit inside the price you are offered; we never bill you for anything.
Factoring for manufacturers: concentration, notice and deductions
A factor is buying your customer's promise to pay, so it studies your customers first. The funding company we refer you to wants invoices to businesses or government agencies for goods already delivered, owed by customers with a record of paying, and as it publishes, its advances run up to 90% of the invoice value.
- Notice. In most factoring your customer is told to pay the factor. Once notified, it cannot settle the invoice by paying you, under the Uniform Commercial Code.
- Concentration. When one customer is most of your sales, its credit is most of the factor's risk. A factor may cap how much of one account it buys, or advance less against it.
- Deductions and chargebacks. When a large retailer or distributor short-pays for damage, shortages or promotions, the factor collects less than the invoice. With recourse factoring, that shortfall comes back to you.
- Recourse. Under recourse factoring you owe the debt if your customer does not pay. Recourse is the most common type, and non-recourse is less common and often costs more, according to NerdWallet, a publisher.
For a larger manufacturer the comparison is an asset-based line from a bank. In the OCC's handbook for bank examiners, common advance rates run from 70% to 85% of eligible receivables, inventory advances typically reach 65% of book value or 80% of net orderly liquidation value, and collections are often run through a lockbox the lender controls. It is not one of the funding types on this site, but it is the benchmark to measure a factoring offer against.
Sources: UCC 9-406, discharge of account debtor after notice of assignment; NerdWallet (a publisher, secondary source): invoice factoring; NerdWallet (a publisher, secondary source): recourse vs non-recourse factoring; OCC, Comptroller's Handbook: Asset-Based Lending.
What the funding company looks for from a manufacturer
For factoring, the review centers on the invoices and the customers behind them. Expect to be asked for the purchase orders, proof of delivery for each invoice, and an aging of your receivables. Setting up a factoring account takes several business days; after that, new invoices move faster.
For a line of credit, the funding company lists at least 1 year in business and about $300,000 or more in yearly revenue. Equipment financing asks for at least 6 months in business, and a decision can come within a day, with funding usually taking several business days. Both have a credit minimum shown on the line of credit and equipment financing pages, and the funder decides the price, the term and any guarantee or lien.
The application itself asks for the business's legal name, EIN and start date, each owner's details, four months of business bank statements and what the money is for. The funding company says the first credit check is a soft pull. When the paperwork is ready, start the application.
State notes for manufacturers
For a California manufacturer, the one product we can refer is non-recourse factoring of invoices already issued, which suits a shop selling on terms to other businesses. Lines of credit, equipment loans and term loans are not referred in California; California businesses sets out why.
We cannot refer manufacturers based in Texas, Virginia, North Dakota or (for now) Florida for any product. In Connecticut and Missouri, cash advances and revenue-based advances are off the list. See state availability for the details.
When an order is not worth financing
- When the order cannot carry the cost. Work out the funding cost against the order's margin, as above. If it eats most of the profit, renegotiate the deposit or the terms before you accept the order.
- When the customer is the risk. A customer that pays late every time is a pricing and credit problem. Under recourse factoring its unpaid invoice comes back to you anyway.
- When the price is the problem. If tariffs or materials raised your cost and your price did not move, funding only finances the loss for longer.
- When the need is long-term. A machine you will run for ten years, or a recurring working-capital line, is what the SBA's 504 and Working Capital Pilot exist for, at longer terms than any short product. Our free and low-cost alternatives guide covers SBA Lender Match and small business development centers.
- When a cash advance would sit on a production cycle. Daily debits do not wait for a net-60 customer. We also do not refer a second advance on top of one you are still repaying.
For manufacturing equipment financing on a machine you plan to keep, the equipment payment calculator shows the monthly payment and total cost against a lease.
Common questions
Can the funder pay my supplier directly?
That is how purchase-order financing works, and this site does not cover it. Factoring pays you after the goods ship and you invoice, and a line of credit lets you pay the supplier yourself when its bill falls due.
My customer pays in 60 days. Can I get paid on delivery?
That is what factoring is for. Once the goods are delivered and invoiced, a factor can advance most of the invoice, up to 90% as the funding company publishes it, and pay you the rest, less its fee, when your customer pays. The first setup takes several business days.
Will my customer know?
In most factoring, yes. Your customer gets a notice to pay the factor, and after that notice a payment to you does not settle the invoice. Telling your main customers before the notice arrives saves them a surprise.
One customer is 70% of my sales. Is that a problem?
It is the first thing a factor will look at, because that customer's credit becomes most of its risk. Expect questions about that customer's payment record, and possibly a cap or a lower advance on its invoices. It is also a risk to your own business whatever the funding.
Is SBA 504 cheaper for a big machine, and how long does it take?
For long-life machinery it often is: 504 loans run 10, 20 or 25 years with rates pegged to the 10-year Treasury, and fees of about 3% of the debt that can be financed. The trade-off is time, weeks to months, and the machine needs at least 10 years of remaining useful life.
Can I finance a used CNC machine?
It depends on the funder: each sets its own limits on age, hours and condition, and some want an appraisal. For SBA 504, the machine needs at least 10 years of remaining useful life. Get the funder's answer before you commit to the seller.
How much more working capital do tariffs force me to carry?
Roughly the tariff on your materials, for as many days as those materials sit in your cycle. In the example above, a 20% tariff on $96,000 of materials ties up $19,200 more per order. Enter your higher monthly costs in the cash gap calculator to see the effect on your whole operation.
Keep reading

Cash gap calculator
How many days and dollars sit between paying your costs and getting paid.
Open the calculator
Invoice factoring cost calculator
Advance, fee, rebate and the yearly rate a factoring fee works out to.
Open the calculator
Equipment payment calculator
Monthly payment and total cost of financing a machine, against a lease.
Open the calculatorInvoice factoring
Sell unpaid invoices to get most of their value now instead of in 30 to 90 days.
How it works
Free and low-cost alternatives
SBA Lender Match, small business development centers, CDFIs and state programs.
Read itReady when you are
Check that we can refer a business in your state, see what to have ready, then apply once with the funding company. Decisions can come in as little as 24 hours, and some businesses are funded as soon as 24 hours after approval. Timing isn't guaranteed: it depends on the product and on your file.
Independent referral service, not a lender or anyone's agent. If you're funded, the funding company may pay us a referral fee, which is part of the price you pay. We never charge you a fee. How we get paid.