Home › Calculators › Invoice factoring cost calculator

Invoice factoring calculator: the advance, the fee and what it costs a year

A factoring fee looks small because it is quoted per 30 days. This calculator turns it into dollars on your invoice and into a simple yearly rate, under each of the three ways factors count the days.

Independent referral service, not a lender or anyone's agent. If you're funded, the funding company may pay us a referral fee, which is part of the price you pay. We never charge you a fee. How we get paid.

Hands on a desk calculator beside a fanned stack of paper invoices
  • InputsInvoice, advance rate, fee, days to pay, fee basis
  • OutputsAdvance, fee, rebate, simple yearly cost
  • Fee basesPer 30 days or part, by the day, flat
  • RunsIn your browser; nothing is sent

What the invoice costs to factor

Advance now
Factoring fee
Rebate when your customer pays
You receive in total
Fee as a share of the invoice
Simple yearly cost of the advance

Advance = invoice × advance rate. Fee = invoice × fee rate × the number of 30-day periods (rounded up, by the day, or once). Rebate = invoice − advance − fee. Simple yearly cost = fee ÷ advance × 365 ÷ days. Many factors add other fees (setup, wires, minimums): ask for every one in writing.

How to use it, input by input

  • Invoice amount (default $50,000): the face value of the invoice you would sell.
  • Advance rate (default 85%): the share the factor pays when it buys the invoice. The rest is held back as a reserve until your customer pays. NerdWallet, a consumer finance publisher, says advances sometimes reach 90% of the invoice.
  • Fee per 30 days (default 3%): the factor's charge, as a percentage of the invoice for each 30 days it stays unpaid. NerdWallet puts factoring rates at 1% to 5% of the invoice value per month, and notes that some factors charge weekly rates instead; convert a weekly rate to a 30-day one before you enter it.
  • Days until your customer pays (default 45): when the factor actually gets paid, counted from the day it buys the invoice. Use your customer's real payment history, not the terms on the invoice.
  • Fee basis: each 30 days or part of, where any part of a period counts as a whole one; by the day, where the fee is prorated to the day; or flat, one time, a single charge however long payment takes. Your agreement says which applies.

Sources: NerdWallet (secondary): Invoice factoring; NerdWallet (secondary): Accounts receivable factoring.

The formulas, written out

  • Advance = invoice × advance rate.
  • Fee, each 30 days or part of = number of 30-day periods started × fee rate × invoice. Day 31 starts a second period.
  • Fee, by the day = fee rate ÷ 30 × days × invoice.
  • Fee, flat = fee rate × invoice, charged once.
  • Rebate = invoice − advance − fee: what the factor sends you after your customer pays.
  • Simple yearly cost = fee ÷ advance × 365 ÷ days.

The yearly cost divides by the advance, not the invoice, because the advance is the only money you had the use of. It is a simple rate: it doesn't compound, and it treats one invoice as one advance repaid in a single payment on the day your customer pays.

Worked example: a $50,000 invoice paid in 45 days

At an 85% advance rate the factor pays $42,500 up front and holds $7,500 in reserve. The fee depends on how the agreement counts the 45 days:

Fee basisFeeRebate when your customer paysSimple yearly cost
Each 30 days or part of (2 periods × 3%)$3,000$4,50057.3%
By the day (3% ÷ 30 × 45 days)$2,250$5,25042.9%
Flat, one time (3%)$1,500$6,00028.6%

On the first row, $3,000 is 7.06% of the $42,500 advance for 45 days; scaled to 365 days, that is 57.3%. The same 3% headline fee costs twice as much under period counting as under a flat fee, because day 31 bought a whole second period.

Late payment moves it again. If the customer took 61 days, period counting would charge a third period: $4,500 in fees, a $3,000 rebate and a simple yearly cost of 63.4%.

Reading the yearly cost, and what it leaves out

  • Other charges. The calculator counts one fee. If an agreement adds others, such as an application fee, a charge for each wire, a monthly minimum or a fee for ending the contract, add them to the fee before you read the yearly cost.
  • Recourse. It assumes your customer pays. Under recourse factoring, which NerdWallet calls the most common type, you are responsible for the debt if your customer fails to pay; non-recourse agreements are less common and often carry higher fees, because the factor takes that risk on.
  • Whose credit counts. NerdWallet notes that the owner's credit score doesn't determine creditworthiness in factoring. The factor is buying your customer's promise to pay, so a strong customer can matter more than a strong balance sheet.
  • Who sets the price. The fee is the funder's to set. If a factoring offer comes to you through this site, the funding company we refer you to may pay us a referral fee, which can sit inside the price you are testing; see how we get paid.

For California businesses, non-recourse factoring of invoices already issued is the one product we can refer at present; see California businesses.

Sources: NerdWallet (secondary): Recourse vs non-recourse factoring; NerdWallet (secondary): Invoice factoring; NerdWallet (secondary): Accounts receivable factoring.

Where factoring fits: funding types and industries

Factoring is built for one gap: work already done for business or government customers who pay on terms. NerdWallet lists customers that are businesses or government agencies, not individual buyers, among what factors look for, so a business paid by consumers at the counter has little to factor.

  • Invoice factoring covers spot and contract factoring, the reserve and the contract terms to read before you sign.
  • Invoice financing is a different product. NerdWallet describes it as borrowing against your invoices, which serve as collateral for a loan or a line, so you keep collecting from your own customers; a business line of credit can do the same job for a gap that keeps coming back.
  • In trucking, freight factoring is invoice factoring built for carriers waiting on broker and shipper payments. In construction, pay applications and retainage shape what a factor will buy, and manufacturing brings net-60 customers and large orders.

To see how many days and dollars factoring would need to cover, start with the cash gap calculator. To weigh factoring against a line, a loan or an advance, see term loan vs line of credit vs advance. When you want a real offer to test, you can start an application.

Sources: NerdWallet (secondary): Accounts receivable factoring; NerdWallet (secondary): Invoice financing; NerdWallet (secondary): Trucking business loans and freight factoring.

Common questions

Is the fee charged on the advance or on the whole invoice?

In this calculator, as in the quotes it is built for, the fee is a percentage of the invoice's face value. That is why the yearly cost runs well above the headline fee: you pay a percentage of $50,000 while only $42,500 reached you. Check your agreement, because the basis decides the cost.

What is the rebate?

It is the part of the reserve that comes back once your customer pays the factor in full: the invoice, less the advance you already received, less the fee. In the worked example it is $4,500 under period counting and $6,000 with a flat fee.

What happens if my customer pays late?

The fee keeps running. Under period counting, day 61 starts a third period and the fee jumps; by the day, it grows a little each day; a flat fee stays where it is. Under a recourse agreement, a customer who never pays can leave you owing the factor.

Why is the yearly cost so much higher than 3%?

Because the 3% is per 30 days, not per year, and it is charged on the full invoice while you received 85% of it. Over 45 days, a $3,000 fee on a $42,500 advance works out to 57.3% a year as a simple rate.

Can I convert a weekly factoring rate?

Roughly: multiply the weekly rate by 30, divide by 7 and use the by-the-day basis. A factor that charges for each week started will cost a little more than that, for the same reason period counting does.

Does this work for one invoice or a whole account?

One invoice at a time. For a contract covering many invoices, run a typical one, then multiply the fee by the number you would sell in a month to see the monthly cost.

Ready when you are

Check that we can refer a business in your state, see what to have ready, then apply once with the funding company. Decisions can come in as little as 24 hours, and some businesses are funded as soon as 24 hours after approval. Timing isn't guaranteed: it depends on the product and on your file.

Independent referral service, not a lender or anyone's agent. If you're funded, the funding company may pay us a referral fee, which is part of the price you pay. We never charge you a fee. How we get paid.

CallStart your application