Home › Calculators › Cash gap calculator
Working capital calculator: your cash gap in days and dollars
Most cash shortages in a working business are a timing problem before they are a profit problem. Enter what you pay out in a month and three day counts, and the calculator shows how many days of costs you carry and what that ties up in dollars.
Independent referral service, not a lender or anyone's agent. If you're funded, the funding company may pay us a referral fee, which is part of the price you pay. We never charge you a fee. How we get paid.

- InputsMonthly costs and three day counts
- OutputsGap days and cash tied up
- PresetsFour labelled examples, not averages
- RunsIn your browser; nothing is sent
How to use it, input by input
The calculator needs four numbers. Each comes with a default you can watch the arithmetic work on, and each default is an example, not a benchmark.
- Monthly costs paid out (default $60,000): what leaves your account in a typical month to do the work, such as payroll, materials, fuel, subcontractors, rent and insurance. Leave out loan principal and owner draws, which sit outside the operating cycle.
- Days from spending to invoicing (default 20): how long your money is out before you can bill for it. For a shop, that is production time; for a subcontractor, it is the stretch from buying materials and paying the crew to the next pay application.
- Days customers take to pay (default 45): the real figure from your deposits, not the terms printed on the invoice. Look back over a few months and count from the invoice date to the day the money landed.
- Days suppliers give you (default 30): how long you can hold a bill before paying it. Wages don't wait 30 days, so if payroll is most of your costs, use a blended figure lower than your supplier terms.
Four presets load example businesses: a construction subcontractor ($120,000 a month; 30, 60 and 30 days), a manufacturer ($200,000; 45, 60 and 30), a medical practice billing insurance ($90,000; 1, 30 and 30) and a trucking company ($40,000; 3, 35 and 0). They show how the shape of the gap changes from one trade to another. They are examples, not industry averages, and your own records beat any example.
The formula, written out
Two lines do all the work:
- Gap days = days from spending to invoicing + days customers take to pay − days suppliers give you.
- Cash tied up = monthly costs × 12 ÷ 365 × gap days.
Multiplying by 12 and dividing by 365 turns a monthly cost into a daily one. Multiplying that daily cost by the gap days gives the amount of your own money that is always out: paid to suppliers and staff, not yet collected from customers.
Accountants call the same idea the cash conversion cycle, written as days of inventory plus days of receivables minus days of payables. This calculator uses the three parts in plain terms, so they fit a contractor or a practice as well as a product business, and adds the step most versions skip: turning the days into dollars. A gap of zero or less means your suppliers' terms are covering the wait.
Worked example: a 35-day gap
With the defaults, the gap is 20 + 45 − 30 = 35 days. The daily cost is $60,000 × 12 ÷ 365 = $1,972.60, and 35 days of it come to $69,041. That is the cash this business has to carry at all times just to keep working at its current size.
Two changes show what moves the number. If customers paid in 30 days instead of 45, the gap would drop to 20 days and the cash tied up to $39,452. If the business grew to $80,000 a month in costs with the same days, the cash tied up would rise to $92,055, which is how a business can run short of cash in its best year.
| Preset (an example only) | Monthly costs | Days to invoice / to get paid / suppliers give | Gap days | Cash tied up |
|---|---|---|---|---|
| Construction subcontractor | $120,000 | 30 / 60 / 30 | 60 | $236,712 |
| Manufacturer | $200,000 | 45 / 60 / 30 | 75 | $493,151 |
| Medical practice billing insurance | $90,000 | 1 / 30 / 30 | 1 | $2,959 |
| Trucking company | $40,000 | 3 / 35 / 0 | 38 | $49,973 |
The medical preset shows why the inputs matter more than the industry label. With supplier days matching the insurers' 30, its gap is a single day. Set supplier days to 7, because most of a practice's cost is payroll paid every week or two, and the gap becomes 24 days, or $71,014.
Days the calculator does not see
The calculator assumes every dollar you bill arrives on the same clock. Two common exceptions are written into federal rules, and both make a real gap longer than the simple one.
Retainage. On federal construction contracts, retainage "shall not exceed 10 percent of the approved estimated amount" (FAR 32.103), and the standard payment clause lets the contracting officer hold back up to 10% of a progress payment until progress is satisfactory (FAR 52.232-5). Retained money is paid at the end of the job, not in 60 days. Check your own contracts for a retainage clause, and treat any retained share as its own, much longer gap rather than folding it into customer days.
Insurance claims. Federal law requires Medicare Part B contractors to pay at least 95% of clean claims within 30 calendar days, and it also sets a floor: no clean claim may be paid within 13 days of receipt if it was filed electronically, or 28 days otherwise (42 U.S.C. 1395u(c)). So even a practice with clean billing waits about two weeks at the fastest, and denied or corrected claims run on a longer clock that one number cannot show.
Seasonality is the third blind spot. The result is an average for a steady month; a restaurant facing January or an HVAC contractor in a mild spring should run the calculator again with that month's costs and collection days.
Sources: Acquisition.gov: FAR 32.103, progress payments under construction contracts; Acquisition.gov: FAR 52.232-5, payments under fixed-price construction contracts; Cornell LII: 42 U.S.C. 1395u, Medicare claims payment.
How to read the result, and what it can't tell you
The dollar figure is the working capital the timing ties up while the business runs at the size you entered. It is a planning number, not a forecast, and not a recommendation to borrow it.
- It doesn't know your bank balance, so it can't say whether the cash you hold already covers the gap.
- It assumes every customer pays. One customer paying 90 days late, or never, changes the picture more than any setting here.
- It spreads costs evenly. A large order, a month with three biweekly paydays or a quarterly tax payment can open a short, deeper gap inside the average.
- It doesn't price anything. To see what covering the gap would cost, run the same dollars through the factoring cost calculator or the business loan calculator.
The cheapest fixes are often in the inputs themselves: invoicing the day the work is done, asking for a deposit, or moving a supplier from 30 to 45 days. In the worked example, each day you take out of the gap is worth $1,972.60.
Funding types and industries this calculator relates to
The size and shape of the gap point to the structures built for it. They don't tell you which one to take; that depends on the price, the timing and your own file.
- A gap caused by business customers on 30- to 90-day terms is what invoice factoring is designed for: you sell the invoice and get most of its value before the customer pays.
- A gap that opens and closes with the seasons fits a business line of credit, drawn when the gap opens and repaid as customers pay.
- A one-time gap, such as materials for an order bigger than usual, is closer to a short-term loan with a fixed schedule.
- A business that can wait weeks has cheaper options, set out in term loan vs line of credit.
The gap looks different in each trade: pay applications and retainage in construction, net-60 customers in manufacturing, insurance claims in medical and dental practices and broker payments in trucking. Once you know your number and want to see what a funder would offer against it, you can start an application.
Common questions
Is this the same as the cash conversion cycle?
Yes, in plain terms. The cash conversion cycle adds days of inventory and days of receivables, then subtracts days of payables. This calculator uses the same three parts, names them so they fit a service or contracting business too, and converts the days into dollars.
What should I enter for days customers take to pay?
The real average from your records, not your invoice terms. Take the invoices paid over the last three to six months and count from each invoice date to its deposit date. If a few large customers pay much later than the rest, run the calculator once with them and once without.
Most of my costs are payroll. What do I put for supplier days?
A blended figure. If 60% of your monthly costs are wages paid within about a week and 40% are bills on 30-day terms, the blend is about 16 days (0.6 × 7 + 0.4 × 30). Entering your supplier terms alone would make the gap look smaller than it is.
Does a large result mean I should borrow?
No. It measures how much cash the timing ties up, not whether you should cover it with funding. Cash you already hold, faster invoicing or longer supplier terms may close it for less. We can't tell you what to take; the calculator only does the arithmetic.
Why does the gap grow when sales grow?
Because costs rise with volume while the days stay the same. Every extra dollar of monthly cost raises the daily cost, and the daily cost is multiplied by every day of the gap, so growing on a 35-day gap means carrying 35 days of the new, higher costs.
Is what I type sent anywhere?
No. The arithmetic runs in your browser, and nothing you enter is sent to us or to any funder. There is no account to open and no email to give.
Keep reading

Invoice factoring cost calculator
Advance, fee, rebate and the yearly rate a factoring fee works out to.
Open the calculator
Business loan calculator
Payment, total interest and the APR once an origination fee is counted, monthly, weekly or daily.
Open the calculatorInvoice factoring
Sell unpaid invoices to get most of their value now instead of in 30 to 90 days.
How it worksBusiness line of credit
Draw what you need, pay interest on what you use, draw again.
How it works
Construction
Retainage, slow pay applications and materials bought weeks before the first check.
See the cash gapReady when you are
Check that we can refer a business in your state, see what to have ready, then apply once with the funding company. Decisions can come in as little as 24 hours, and some businesses are funded as soon as 24 hours after approval. Timing isn't guaranteed: it depends on the product and on your file.
Independent referral service, not a lender or anyone's agent. If you're funded, the funding company may pay us a referral fee, which is part of the price you pay. We never charge you a fee. How we get paid.