Home › Guides › Factor rates explained

Factor rate explained: what it costs, and how to turn it into an APR

A factor rate tells you how many dollars you repay, never how fast. This guide shows the arithmetic that turns it into an APR, works one rate over 3, 6 and 12 months, and explains why paying early often saves nothing.

Independent referral service, not a lender or anyone's agent. If you're funded, the funding company may pay us a referral fee, which is part of the price you pay. We never charge you a fee. How we get paid.

Coins and a folded dollar bill resting on a printed agreement

What a factor rate is

A factor rate is a multiplier. Take the amount advanced, multiply it by the factor rate, and you have the total you repay. A $20,000 advance at 1.30 means $26,000 back, so the cost is $6,000, and that $6,000 is fixed the day you sign.

SBA's Office of Advocacy explains that with a merchant cash advance, the business repays based on a factor rate that is a multiple of the amount advanced, applied to the whole amount at the beginning. Online lenders commonly use factor rates to price merchant cash advances and short-term loans, according to NerdWallet.

In the Federal Reserve's 2019 review of online lender websites, one lender quoted merchant cash advance factor rates "usually between 1.14 and 1.48". NerdWallet, a consumer finance publisher, puts the typical range at 1.1 to 1.5. Neither range says anything about the term, and the term is what decides the price.

Sources: SBA Office of Advocacy: Interest rates issue brief; Federal Reserve: What small business borrowers find when browsing online lender websites; NerdWallet (secondary): Factor rate; NerdWallet (secondary): Merchant cash advance.

Factor rate vs interest rate

Interest is charged on the balance you still owe, for the time you owe it. As you repay, the balance falls and so does the interest. A factor rate is charged once, on the full amount, at the start: advances "do not reflect the decreasing amount owed as a business owner pays back what was borrowed", in the words of SBA's Office of Advocacy.

That is why a factor rate of 1.30 is not 30%. A $20,000 loan at a 30% APR, repaid by equal business-day payments over 12 months, costs about $3,161 in interest. The same $20,000 at a factor rate of 1.30 over the same 12 months costs $6,000, nearly twice as much.

The confusion is old enough that regulators have written rules about it. The Fed's review found lenders describing costs in nontraditional terms, and some merchant cash advance sites giving no cost information at all. From January 1, 2026, California bars a provider from using the terms interest or rate in a deceptive way that could reasonably mislead the recipient, and New York's disclosure law says other measures of cost may not be presented as a rate unless they are the annual interest rate or the APR.

Sources: SBA Office of Advocacy: Interest rates issue brief; Federal Reserve: What small business borrowers find when browsing online lender websites; California Legislative Information: Financial Code, Division 9.5 (commercial financing disclosures); New York Senate: N.Y. Financial Services Law 810.

How to turn a factor rate into an APR

You need four things from the offer: the amount that will actually reach you after fees, the total payback, the payment amount and how often it is taken. Then:

  1. Count the payments: payback ÷ payment.
  2. Find the rate per payment period at which those payments, discounted back to the day you were funded, add up to the cash you received. A spreadsheet's RATE function does this, and so does the MCA calculator.
  3. Multiply that rate by the number of payment periods in a year: 260 for business days, 365 for every day, 52 for weekly.

That is the actuarial method of Appendix J to Regulation Z, the federal Truth in Lending rule, and state disclosure laws borrow it. California's regulations require the United States Rule method or the actuarial method, "as both are set forth in Appendix J" (10 CCR 940). New York requires an estimated APR "calculated in accordance with the federal Truth in Lending Act, Regulation Z" on the commercial financing its law covers.

The shortcut most people try, dividing the cost by the advance and spreading it over the term, understates the APR badly. It assumes you have the full amount for the whole term, when in fact you start repaying the next business day. With daily or weekly repayment, the true APR comes out close to double the shortcut.

Sources: CFPB: Regulation Z, Appendix J (annual percentage rate computations); Cornell LII: 10 CCR 940, calculation of annual percentage rate (unofficial copy); Public.Law: N.Y. Financial Services Law 803.

One factor rate over 3, 6 and 12 months

Here is $20,000 at a factor rate of 1.30, so $26,000 repaid, collected in equal business-day debits over three different terms. The dollars never change; only the time does.

Repaid overDebitsEach debitShortcut (cost ÷ advance, annualized)Estimated APR
3 months65$400120%about 217%
6 months130$20060%about 109%
12 months260$10030%about 55%

Cut the term to a quarter and the APR roughly quadruples. SBA's Office of Advocacy makes the general point: "shorter term loans have higher APRs". Weekly collection barely changes the picture, since 26 weekly payments of $1,000 over 6 months work out to about 107%.

With a holdback instead of a fixed debit, the term isn't fixed, so neither is the APR. A busy season repays faster and pushes the yearly rate up; a slow one stretches the term and pulls it down. The MCA calculator shows both from your own sales figures.

Sources: SBA Office of Advocacy: Interest rates issue brief; CFPB: Regulation Z, Appendix J (annual percentage rate computations).

Early payoff: why paying sooner often saves nothing

With interest, paying a loan off early stops the interest. With a factor rate, the whole charge was set on day one, so paying early saves nothing unless the contract gives an early-payoff discount.

Take the 6-month version above. After 3 months, 65 debits of $200 have gone out and $13,000 of the payback is still owed. With no discount, the payoff is $13,000. A loan at the same APR of about 109% would have a payoff of about $11,355 at that point, because the interest for the last 3 months would not yet have been earned. The $1,645 difference is the price of a charge that was fixed at the start.

So ask before you sign: is there an early-payoff discount, how is it worked out, does it apply to all of the remaining charge or only part of it, and is it written into the contract rather than promised in an email? If a funder offers to renew an advance before it is paid off, ask whether the payoff of the old one still includes its full remaining charge.

Sources: SBA Office of Advocacy: Interest rates issue brief.

What to ask for before you sign

  • The amount that will actually reach your account, after every fee.
  • The total payback, in dollars.
  • The debit: a fixed amount or a share of sales, and whether it runs every business day, every day or weekly.
  • The estimated term, and the sales figure it assumes.
  • An estimated APR. California requires providers to disclose the total cost of commercial financing as an annualized rate on covered offers of $500,000 or less, and New York requires an estimated APR on the financing its law covers; anywhere else, you can work one out with the steps above.
  • How reconciliation works if the debit is fixed and sales fall.
  • Whether there is an early-payoff discount, in writing.

Then run the offer through the MCA calculator and set it beside a loan in the business loan calculator. An offer that won't give you these numbers is telling you something; the red flags guide covers the rest. When you want offers to compare, you can start an application. If one reaches you through this site, the funding company we refer you to may pay us a referral fee that can be part of the factor rate (how we get paid).

Sources: Public.Law: Cal. Financial Code 22802; Public.Law: Cal. Financial Code 22800; Public.Law: N.Y. Financial Services Law 803.

Common questions

How do I convert a factor rate to an APR?

You need the payment schedule as well as the rate. Find the rate per payment at which the payments repay the cash you received, then multiply it by the payments in a year. The MCA calculator and a spreadsheet's RATE function both do it in seconds.

Is a factor rate of 1.2 cheap?

Not necessarily. 1.20 repaid over 12 months by business-day debits works out to roughly a 37% APR; repaid over 3 months, it is well over 100%. Judge a factor rate only with its term attached.

Does the factor rate include fees?

Not always. Origination or other fees can be taken out of the advance on top of the factor rate, which leaves you less cash for the same payback and raises the APR. Ask for the amount that will reach your account.

Is the factor rate the same as the holdback or retrieval rate?

No. The factor rate sets how much you repay. The holdback, sometimes called the retrieval rate, sets what share of each day's sales goes toward it, and so how fast it is repaid.

Can I pay off a factor rate advance early to save money?

Only if the contract has an early-payoff discount. Without one, the payoff is the full remaining payback, whatever the date. Get any discount terms in writing before you sign.

Ready when you are

Check that we can refer a business in your state, see what to have ready, then apply once with the funding company. Decisions can come in as little as 24 hours, and some businesses are funded as soon as 24 hours after approval. Timing isn't guaranteed: it depends on the product and on your file.

Independent referral service, not a lender or anyone's agent. If you're funded, the funding company may pay us a referral fee, which is part of the price you pay. We never charge you a fee. How we get paid.

CallStart your application